强乱中文字幕在线播放

      <code id="7jt7r"></code>


            關閉
            點擊這里給我發消息
            點擊這里給我發消息
             +86 0512-62751429
            +86 13416743702
            Welcome to YUSH Electronic Technology Co.,Ltd.
            YUSH Electronic
              English    Chinese
              0.8 - 3.0 mm Thick Pcb Depaneling Machine With LCD Display High Speed Steel Blade
              Detailed Product Description

              Feature

              1. The shaft of the knives( top and bottom) is design to be an an integral whole, it is convenient to install, pick and place.

               

              2.This machine adopts computer screen control with a counting device which can be preset production. Gap of the cutting tool displayed by the display screen directly.

               

              3.All the v-cut pcb board can be cut by this machine.

               

              4.Using the machine to cut, reduce stress, prevent the solder joint cracking.

               

              5.Pcb board is cut by multiple cutters which can cut several board once.

               

              6.The machine top cutter wheel can be slightly adjust:0-5mm.

               

              7.The distance between the knives can be adjusted, and it is suitable to cut single pcb board within width 15-20mm.

               

              8.Blade is made of SKH51 high speed steel with long service life and wear resistance.

               

              9.Cutting speed can be set and conveniently adjusted by turn-knob.

               

              10.Install conveyer belt, pcb board which is cut can be sent out directly, then docking with the next machine and reducing the times of artificial pick and place. This machine can cut LED panel, fiberboard, aluminum board (more than 400mm ) and special board.

               

              11.With several knives, the machine operates simply and efficiently and is suitable for mass production.

               

              Specification


              Power : 110V/220V AC 60HZ/50HZ


              Size: L1300*W400*H1000mm


              Weight : 150kgs


              Process of cutting is unlimited


              PCB thickness: 0.8-3.0mm


              Applicable board: can cut LED panel, fiberboard, aluminum board (more than 400mm ) and special board.

               
              Product Categories
                                      0.8 - 3.0 mm Thick Pcb Depaneling Machine With LCD Display High Speed Steel Blade
                                      0.8 - 3.0 mm Thick Pcb Depaneling Machine With LCD Display High Speed Steel Blade
                                      0.8 - 3.0 mm Thick Pcb Depaneling Machine With LCD Display High Speed Steel Blade
                                       
                                      Detailed Product Description

                                      Feature

                                      1. The shaft of the knives( top and bottom) is design to be an an integral whole, it is convenient to install, pick and place.

                                       

                                      2.This machine adopts computer screen control with a counting device which can be preset production. Gap of the cutting tool displayed by the display screen directly.

                                       

                                      3.All the v-cut pcb board can be cut by this machine.

                                       

                                      4.Using the machine to cut, reduce stress, prevent the solder joint cracking.

                                       

                                      5.Pcb board is cut by multiple cutters which can cut several board once.

                                       

                                      6.The machine top cutter wheel can be slightly adjust:0-5mm.

                                       

                                      7.The distance between the knives can be adjusted, and it is suitable to cut single pcb board within width 15-20mm.

                                       

                                      8.Blade is made of SKH51 high speed steel with long service life and wear resistance.

                                       

                                      9.Cutting speed can be set and conveniently adjusted by turn-knob.

                                       

                                      10.Install conveyer belt, pcb board which is cut can be sent out directly, then docking with the next machine and reducing the times of artificial pick and place. This machine can cut LED panel, fiberboard, aluminum board (more than 400mm ) and special board.

                                       

                                      11.With several knives, the machine operates simply and efficiently and is suitable for mass production.

                                       

                                      Specification


                                      Power : 110V/220V AC 60HZ/50HZ


                                      Size: L1300*W400*H1000mm


                                      Weight : 150kgs


                                      Process of cutting is unlimited


                                      PCB thickness: 0.8-3.0mm


                                      Applicable board: can cut LED panel, fiberboard, aluminum board (more than 400mm ) and special board.

                                       
                                      Online Message
                                      Welcome message, we will reply within 24 hours!
                                      *Subject:
                                      *Your E-Mail:
                                      (Please make sure your E-mail address is correct.
                                      Else, the receiver cannot reply you afterwards. )

                                      Content:
                                      *Country/Region:
                                      Your Company:
                                      Your Name:
                                      Tel:
                                      Fax:
                                      Related Product
                                      YUSH Electronic Technology Co.,Ltd. Pomeas Optical Technology Copyright 2016
                                      CONTACT US
                                      Website:http://www.okna-samara.com
                                      Contacts:Eva Liu +86 13416743702
                                      Tel:+86-512-62751429
                                      Skype:evaliuhuan
                                      Email:sales@yushunli.com evaliu@hk-yush.com
                                      Address: Building H, GuoRui Pioneering Park,
                                      No. 1068 Jinyang East Road, Lujia Town, Kunshan,Suzhou.
                                      Postcode:215331
                                      Dongguan Factory Address: 5th Floor, No.10,
                                      Shanquan Road, Yongtou Village, Chang’an Town,
                                      Dongguan City, Guangdong province, China.
                                      Postcode:523843
                                      YUSH Electronic Technology Co.,Ltd. Pomeas Optical Technology Copyright 2016    
                                      强乱中文字幕在线播放

                                        <code id="7jt7r"></code>